TICO CV/PF is a very high stress seating manufactured from press cured laminates of heavy duty synthetic rubber proofed fabric and is usually specified for arduous and very high stress applications. CV/PF is a popular solution to the problem of structural damage caused by shrinkage, rotation, differential settlement and localised stresses.
Installation: The surface on to which the resilient seating is to be bonded should be level, clean and flat. Suitable adhesive should be used and the seating held firmly in place until the correct bond strength is achieved. Pre-cast beams and slabs may be placed directly onto resilient seatings.
If a joint or slab is to be cast in situ, then it is important to ensure that no concrete is allowed to bridge the restraint barrier. It is suggested that this can be achieved by either employing TICO Void Filler or temporarily by infilling with compacted sand and sealing with polythene prior to casting the concrete.
Non-Standard sizes and thicknesses are available on request. TICO CV/PFS can be supplied with a protective Hypalon lacquer edge proofing if required.
For assistance with your structural design or thermal calculations.